產品中心
PRODUCTS
詳情介紹
自動調節高溫蝶閥，普遍適用于建材、玻璃、礦山、電力、輕工、造紙等行業的通風、環保工程、煙氣治理、熱能回收等管道系統中。對管道中氣體介質按不同控制信號調節流量大小和切斷。
This valve is widely used in the pipe system such as venting，environment protection, cont-rolling smoke and collecting waste heat in building material, glass, mining, power, light industry and papermaking departments. It can change the flow and cut off gas medium in the pipe by the different control signal.
結構特點：
Structure characteristic:
自動調節高溫蝶閥，采用不銹鋼、優質碳鋼焊接。具有耐高溫、耐磨損、結構合理、流阻損失小、操作靈活、指示方位明確、維護方便、使用壽命長等優點。可水平安裝或垂直安裝。配用DKJ、ZKJ、伯納德等電動執行器及有關配件，可實現手動、自動無干擾切換，微機程控、自動控制或中央集中控制，是實現自動化控制操作、調節流量的理想設備。
The valve is welded in stainless steel and fine carbon steel, having the features of high-temperature resistance, compact structure, endurance, little in the lost of flow resistance, definite direction, easy to maintenance and long life. It can be installed in horizontal or vertical. The valve is used with DKJ, ZKJ, Bernard electric actuator and other accessory to form a complete set to realize manual and automatic exchange without interference, micro-computer long-range control, automatic control or center concentrating control. It is the ideal equipment of realizing operation of automatic control and adjusting flow.
性能參數：
Performance parameter:
|
公稱壓力 Nominal pressure |
介質流速 Medium velocity |
泄漏率 Leakage ratio |
適用溫度 Suitable temperature |
適用介質 Suitable medium |
|
0.05MPa |
≤25m/s |
≤1.5％ |
≤450℃ |
空氣、煙氣、粉塵氣體等高溫氣體 Air, smoke , gas with powder, etc |
|
≤650℃ |
產品詢價
Online
Message
如果您對我公司有建議或反饋，請在此頁面填寫相關信息并提交，會有工作人員及時與您聯系， 或請直接撥打我們的電話。
