該系列三、四通溜子（又名分料器）廣泛適用于建材、冶金、礦山、輕工、糧食等行業。作為固體晶粒、粉狀物料輸送系統中改變物料流向的理想設備。

The valve, which is also named separating material machine, is widely used in building material, metallurgy, mining, light industry and food industries etc. It is the ideal equipment to change flow direction of solid crystal and powder material in transportation system

 

結構特點

Structure characteristic

該閥采用優質鋼板焊接而成，根據不同的需要配備不同的執行機構，具有輕巧耐磨，開位指示明確，切換方便，操作靈活等特點。

Ⅰ型為側三通溜子，Ⅱ?yàn)檎镒樱鬄樗耐镒印Ｆ潋?qū)動方式分為：S手動，D電動，Z自動，Q氣動， Y電液動。

The valve is welded in fine steel and equipped with different actuators according to the different demands. It has the features of lightweight, antifriction, definite indicating direction, handy switching and flexible operation etc.

Type Ⅰ is side three-way liuzi, type Ⅱ is face three-way liuzi, type Ⅲ is four-way liuzi. The driving types are five: S denotes manual, D denotes electric, Z denotes automatic, Q denotes pneumatic and Y denotes electric hydraulic.

 

性能參數

Performance parameter

工作壓力 Working pressure	適用溫度 Suitable temperature	適用物料比重 Suitable   material specific gravity	適用介質 Suitable medium
0.01MPa	≤300℃	≤2.5t/m3	晶粒、顆粒、粉狀物料等 Crystal, grain and powder etc

 

傳動裝置參數：

Transmission device parameter:

規格 Type	200~250	300~400	500~600	700~800
電動推桿 Electric draw stem	DTⅠA63-M P：0.06KW	DTⅠA63-M P：0.09KW	DTAⅡ100-M P：0.25KW	DTⅡA250-M P：0.37KW
自動裝置 Automatic device	DKJ-210 P：0.025KW	DKJ-310 P：0.065KW	DKJ-410 P：0.16KW	DKJ-510 P：0.25KW
氣動推桿 Pneumatic   draw stem	10A-5TC50B	10A-5TC63B	10A-5TC80B	10A-5TC100B
電液推桿 Electric hydraulic	DYT100 P：0.37KW		DYT300 P：0.37KW

 

FC---Ⅰ系列 外形連接尺寸：

Appearance joint dimension:

A	B	C	α	H	H1	L	n-d	L1	L2	L3	L4	L5	L6
200×200	245×245	280×280	45o	530	394	289	8-Φ10	180	220	220	290	320	340
			50o	600	445	293
			55o	650	505	290
			60o	735	594	295
250×250	305×305	350×350	45o	605	448	338	12-Φ10	220	250	250	310	345	410
			50o	675	512	342
			55o	735	595	346
			60o	820	706	355
300×300	355×355	400×400	45o	690	499	374	12-Φ12	250	280	280	375	370	440
			50o	750	568	380
			55o	820	658	380
			60o	910	791	405
400×400	455×455	500×500	45o	825	598	463	16-Φ12	280	325	325	425	420	470
			50o	930	709	490
			55o	1020	859	504
			60o	1155	1005	505
500×500	555×555	600×600	45o	1000	755	575	20-Φ14	350	385	395	480	500	520
			50o	1110	888	597
			55o	1250	1052	632
			60o	1425	1260	647
600×600	655×655	700×700	45o	1297	921	706	20-Φ14	400	450	450	540	550	570
			50o	1430	1097	742
			55o	1500	1223	731
			60o	1677	1481	768
700×700	755×755	800×800	45o	1450	1029	779	20-Φ14	450	500	500	630	620	650
			50o	1520	1163	809
			55o	1708	1421	850
			60o	1863	1646	850

 

A	B	C	α	H	H1	L	n-d	L1	L2	L3	L4	L5	L6
800×800	855×855	900×900	45o	1555	1125	860	24-Φ14	500	550	550	680	670	700
			50o	1702	1327	907
			55o	1892	1594	946
			60o	2145	1885	913

 

FC---Ⅱ系列 外形連接尺寸：

Appearance joint dimension:

A	B	C	α	H	L	n-d	L1	L2	L3	L4	L5	L6
200×200	245×245	280×280	45o	267	177	8-Φ10	180	220	220	290	320	340
			50o	282	174
			55o	299	161
			60o	352	160

 

A	B	C	α	H	L	n-d	L1	L2	L3	L4	L5	L6
250×250	305×305	350×350	45o	298	198	12-Φ10	220	250	250	310	345	410
			50o	330	193
			55o	338	181
			60o	396	182
300×300	355×355	400×400	45o	322	212	12-Φ12	250	280	280	375	370	440
			50o	349	209
			55o	386	204
			60o	431	200
400×400	455×455	500×500	45o	381	251	16-Φ12	280	325	325	425	420	470
			50o	419	251
			55o	448	244
			60o	525	245
500×500	555×555	600×600	45o	470	310	20-Φ14	350	385	395	480	500	520
			50o	532	320
			55o	557	290
			60o	644	300
600×600	655×655	700×700	45o	502	290	20-Φ14	400	450	450	540	550	570
			50o	561	310
			55o	643	330
			60o	738	340
700×700	755×755	800×800	45o	617	380	20-Φ14	450	500	500	630	620	650
			50o	678	400
			55o	795	420
			60o	937	442
800×800	855×855	900×900	45o	672	408	24-Φ14	500	550	550	680	670	700
			50o	763	445
			55o	900	482

 

FC---Ⅲ系列 外形連接尺寸：

Appearance joint dimension:

A	B	C	α	H	H1	L	n-d	L1	L2	L3	L4
200×200	245×245	280×280	45o	530	394	578	8-Φ10	440	580	640	680
			50o	600	445	586
			55o	650	505	580
			60o	735	594	590
250×250	305×305	350×350	45o	605	448	676	12-Φ10	500	620	690	820
			50o	675	512	684
			55o	735	585	692
			60o	820	656	710
300×300	355×355	400×400	45o	690	499	748	12-Φ12	560	750	740	880
			50o	750	568	760
			55o	820	638	760
			60o	910	741	810
400×400	455×455	500×500	45o	825	598	926	16-Φ12	650	850	840	940
			50o	930	699	980
			55o	1020	784	1008
			60o	1150	935	1010
500×500	555×555	600×600	45o	1000	730	1150	20-Φ14	790	960	1000	1040
			50o	1110	838	1194
			55o	1250	972	1264
			60o	1425	1170	1294
600×600	655×655	700×700	45o	1297	921	1412	20-Φ14	900	1080	1100	1140
			50o	1430	1027	1484
			55o	1500	1133	1462
			60o	1677	1351	1536
700×700	755×755	800×800	45o	1450	1029	1558	20-Φ14	1000	1260	1240	1300
			50o	1520	1128	1618
			55o	1708	1311	1700
			60o	1863	1506	1700
800×800	855×855	900×900	45o	1635	1125	1720	24-Φ14	1100	1360	1340	1400
			50o	1702	1232	1814
			55o	1892	1449	1892
			60o	2145	1735	1826

 

工作原理：

Working principle

三、四通溜子主要由本體、分料板、傳動軸、軸承座、密封副、搖桿、傳動裝置等組成。手動三、四通溜子，根據需要的方向人工推動搖桿上的重錘，即完成介質流向的切換，滿足工況的需要；電動三、四通溜子，指令控制元件使DT型電動推桿通電后，推動搖桿轉動閥軸即可完成介質流向的切換，滿足工況的需要。自動三、四通溜子，配用DKJ型電動執行器，由電動執行器接受、變送、調節DCS、PLC等上位儀表的控制信號或操作器手控信號，輸出角位移帶動傳動軸，把動力傳給搖桿及閥軸帶動分料板作同步旋轉運動，達到換向及任意調節的作用。電動執行器與分料板的開度同步反饋0～10mA或 4～20mA直流電信號，用戶可根據電流信號來控制分料板的任意開度，達到調節的目的。氣動三、四通溜子，配用10A-5型氣動元件，通過雙控二位五通電控?fù)Q向閥驅動氣動推桿推動搖桿帶動閥軸、分料板即可完成介質流向的切換，滿足工況的需要。電液動三、四通溜子，配用DYT型電液推桿，推動搖桿帶動閥軸、分料板即可完成介質流向的切換，滿足工況的需要。

The valve is mainly made up of body, separating plate, transmission shaft, bearing support, sealing, rocker and transmission device etc. Push the heavy hammer of manual valve and switch the flow direction according to the requirement. Command control unit of electric valve power the DT electric draw stem and push the rocker to rotate valve axle in order to switch medium flow direction. The automatic valve is equipped with DKJ electric actuator, which receives and adjusts the control sign of DCS, PLC epistasy meter or manual control sign of operating and outputs angle displacement to drive transmission shaft, then drive separating plate rotating with rocker and valve axle. The open angle of electric actuator and separating plate feeds back 0～10mA or 4～20mA DC signal. Users can control the open angle of plate according to the current signal to adjust the valve. Pneumatic valve is equipped with type 10A-5 pneumatic element and pneumatic draw stem driven by double-control two-bit five-way electric control reversal valve, pushing rocker to drive the axle and plate and switch the flow direction of medium. Electric hydraulic valve is equipped with type DYT electric hydraulic draw stem; it pushes the rocker to drive axle and plate and switch flow direction of medium and meets the requirement of working conditions.

 

運輸及保管：

Transportation and protection

l  運輸時應避免撞擊三、四通溜子，應處于全閉位置以防在運輸中分料板和傳動部件損壞。

l  當三、四通溜子水平放置運輸時傳動裝置及傳動部位應懸空，以防止傳動軸受力過大導致變形損壞。

l  傳動裝置及傳動部位應作防潮、防雨處理。

l  三、四通溜子應存放在干燥的室內，不允許露天存放或堆置。長期存放時應使三、四通溜子處于關閉狀態，各傳動部位加潤滑油，傳動裝置作防潮、防塵處理。

l   Avoid bumping and the valve is in full close in order to avoid damage of disc and driving part.

l   Transmission device and part should be hung up when the valve is in horizontal in order to prevent damage of driving axle.

l   Treatment of dampproof and rainproof should be done to transmission device and part.

l   The valve should be stored in dry room. It should be in full close state when long stored. Add lubrication to the transmission part and the device should be dampproof and dustproof.

 

維護及檢修：

Maintenance and examination

l  定期檢查各傳動部位的運行情況。

l  定期更換電動執行器減速器的潤滑油，電動推桿的潤滑脂，電液推桿的動力油（150#機油），以保證其機械部分不受損壞。

l  定期檢查三、四通溜子轉軸處的密封狀況，如發現密封問題請更換或填加石墨填料。

l  定期檢查電液推桿、氣動推桿的活塞密封圈，以保證傳動裝置正常運行。

l   Examine the operating condition of driving part regularly.

l   Replace the lubrication of actuator reducer, lubricating grease of electric draw stem and motor oil of electric hydraulic draw stem regularly.

l   Examine the seal condition of rotate axle regularly. Replace or add graphite stuffing if there is mistake.

l   Examine the plunger joint ring of electric hydraulic draw stem and pneumatic draw stem in order to ensure the normal operation of transmission device.

 

訂貨須知:

Information for order

l  選用訂貨時，請參照產品樣本注明產品規格、型號、溜子角度、技術參數（使用溫度、設備工況、介質性質等）。

l  樣本所示產品圖例及表格中所列傳動裝置型號為我公司基本配置，您若有特殊要求（防爆、戶外、調節型、開關型等）另行配置傳動裝置，請參照樣本附錄中相應傳動裝置配置說明，并加以標注在基本型號后面。

l  選用訂貨時，若未注明客戶選用傳動裝置代號的按我公司基本型配置，其基本型為普通型裝置，不帶任何有關特殊要求及相關配件。

l  表格中未列規格、用于特殊介質或其它特殊要求，請與我公司經銷部、技術部聯系，可為您另行設計、制造。

l   Please indicate the type, model, angle of the valve and technical parameter (using temperature, working condition of equipment and characteristic of medium etc) referring to the product sample when you place an order.

l   Product legend in the sample and actuator code in the form is the basic collocation of our company. If you have especial demand (anti-explosion, outdoors, adjusting type and switch type etc) to another actuator, please refer to the explanation of corresponding actuator code in the sample appendix and indicate it below the basic model.

l   If you don’t indicate actuator code selected by user when you place an order, we will select the basic collocation of our company for you. The basic type is a normal type without any special request and corresponding accessory.

l   If you have other special demand, need special medium or the spec that is not listed in the table, please contact with our department of market and technology. We can design and manufacture for you especially.